Previous month:
March 2021
Next month:
May 2021

April 2021

CARD: Many Messages

MANYMESSAGES

Measurements:  

  • Night of Navy- 4 ¼” x 11” and 2 ½” x 2 ½”
  • Bermuda Bay- 4” x 5 ¼” and     ½” x 2 ½” strip
  • Coastal Cabana- 2 strips @ ½” x 2 ½”
  • Pool Party- 2 strips @ ½” x 2 ½”
  • Basic White- approx. 6 ¼” x 5”
  • DSP: True Love DSP- 3 7/8” x 5 1/8”

Instructions:

    1. Fold the Night of Navy card base in half at 5 ½” and attach the Bermuda Bay 4” x 5 ¼” layer with Stampin’ SEAL.
    2. Next, attach the True Love DSP layer to the card front with Stampin’ SEAL.
    3. Create the ombre panel. Take the square Night of Navy cardstock (2 ½” x 2 ½”) and cover it with Stampin’ SEAL adhesive. Start at the top of the square and layer with the Pool Party, Coastal Cabana, and one strip of Bermuda Bay cardstock. Then, attach that panel to the card front with Stampin’ Dimensionals.
    4. For the sentiment we are using the Stamparatus. Line your Basic White cardstock and stamp in the Stamparatus and stamp using Night of Navy ink. You will be making several sentiments at once that you can use later. Also, you can use any of the sentiments on this card. There are lots to choose from. After you stamp then die-cut the sentiments using the matching Messages Die.
    5. Make a faux bow on the ombre square by laying your twine in the shape of a bow and using a glue dot to keep it down. I shared a picture of this so you can see what is under the sentiment. I do this to keep the bulk of the card down. If you tie a bow there will be a big lump!
    6. Add a Stampin’ Dimensional under your sentiment. I added one on the top and the bottom of the sentiment away from the twine then attach to the card. Use a Mini Glue Dot to attach one heart from the stamp set.
    7. Finally, add some Blue Adhesive Backed Gems to finish off your beautiful card.

CARD: Oh Snap!

OHSNAP

Measurements:  

  • Very Vanilla cardstock:  11” x 4.25”  
  • Old Olive Designer paper (from Brights stack):  5” x 3.75”
  • Soft Seafoam Cardstock to cut rectangle:  4” x 3.5”
  • Old Olive Designer papers from Brights stack to cut alligator and plants

Instructions:

    1. Score and fold 11” x 4.25” piece of Very Vanilla
    2. Adhere 5” x 3.75” piece of Old Olive Designer Paper from the Brights stack to card front
    3. Die cut the 4” x 3.5” piece of Soft Sea Foam cardstock with Rectangle Stitched Die that is closest in size to the cardstock
    4. Adhere the die cut piece from step 3 to card front at an angle as seen in photo
    5. Stamp the Alligator image from Oh, Snap on Old Olive Designer paper and cut out with snips.
    6. Die cut two succulents from the Potted Succulents Dies with Old Olive designer paper from the Brights stack.
    7. Assemble Alligator and succulents on the card front as seen in the photo above
    8. Add greeting “Oh, SNAP” with Tuxedo Memento Black ink.
    9. Add greeting of choice to inside of card.

CARD: Sailing Home

This morning's card features one of my favorite embossing folders, the Old World Paper 3D.  Unfortunately, it is on the retiring list, and won't be available after May 3rd--be sure you get yours today!!!

SAILINGHOME

Measurements:  

  • Whisper White: 8 ½” x 5 ½”;  3 ¾” x 5”;  2 ½” x 2”
  • Night of Navy: 3 6/8” x 5 1/8”

Instructions:

  1. Create Whisper White card base.
  2. Ink sailboats using Night of Navy ink and stamp onto Whisper White scraps. Die-cut using Smooth Sailing dies.
  3. Ink brayer with Night of Navy ink and apply to inside of Old World Paper 3D embossing folder. Insert Whisper White layer. Run through Stampin’ Cut & Emboss Machine.
  4. Ink phrase with Night of Navy ink and stamp onto Whisper White card stock. Die-cut using Stitched Nested Labels
  5. Using Multipurpose Liquid Glue, adhere Whisper White layer to Night of Navy layer and then to card base. Adhere phrase.
  6. Attach sailboats to card front using Stampin’ Dimensionals.



CARD: Fine Art Floral

Good morning!  A quick and simple card for you this morning, using the Fine Art Floral Designer Paper and Golden Garden Acetate!  This paper is found in the 2021 Jan-Jun Catalog, and will be available through the end of June!

FINEARTFLORAL

Measurements

  • Blushing Bride: 5 ½” x 8 ½”, 4” x 5 ¼”
  • Basic White: scrap
  • DSP: 2” x 5 ¼”
  • Acetate: 2” x 5 ¼”

Instructions:

  1. Stamp small flower image in Blushing Bride randomly over the layer of blushing bride.
  2. Squirt some liquid glue on the Silicone Craft Sheet, dip the sponge into the glue and dab it over the flowers, cover the glued areas with Gilded Leafing and brush off excess with another sponge.
  3. Place the 12x12 sheets of the DSP and coordinating piece of Acetate on your trimmer and cut a 2 x 5 ¼ strip.
  4. Roll Mini Glue Dots and place them on the back of the acetate on the printing so they won’t be seen, add acetate to coordinating piece of DSP and add to layer.
  5. Wrap ribbon around this layer and tie in a knot, add to the card base.
  6. Stamp sentiment on scrap of white in Merry Merlot ink and crop with label die.

 

 


Only a Few More Days!

 

 

Last Chance Products
 
 

Only a Few More Days!


Don't let time slip away! The new Annual Catalog goes live on May 4th and that means retiring stamps and accessories are only available for a few more days - maybe less!

Stamps will be available through April 23rd, but all other items, including bundles, dies, punches, and embellishments are only available while supplies last. Many have already sold out, so get your top picks before the are gone!

Shop now to get your bundles with their 10% savings, retiring In Colors, and a whole selection of goodies at up to 75% off!

Happy Stamping,

Tammy

 
TIMELESS TULIPS BUNDLE #153793
 
GAME ON CLING STAMP SET
 
TASTEFUL TOUCHES BUNDLE
Classic Stampin' Pad Assortment In Color 2018-2020 #147153

Sneak Peek - Classic Stampin' Pad Assortment In Color 2021-2023
Polished Pink, Pale Papaya, Soft Succulent, Evening Evergreen, and Fresh Freesia. Available May 4th with coordinating cardstock, markers, and embellishments

SHOP ONLINE
 
About Me
Tammy Fite

Tammy Fite

Stamp with Tammy

Albuquerque, NM

505-440-4936

stampwithtammy@gmail.com

www.stampwithtammy.com


Clean & Simple for Two Challenges!

Good afternoon!  I was able to take an hour this afternoon and "work" in my stamp room!  (I love this job!!)  I made this card for two challenges:  the Paper Players and Color Hues:

Ppthespot

I am, by nature, a simple stamper.  BUT, I do like to use lots of designer paper, etc.  So leaving so much white space is much harder for me!  I am happy with the way it turned out!  Do you have a birthday coming up--perhaps you'd like to receive this card?  Leave me a comment!!

 

Supplies used:


CARD: Hey Birthday Chick

BIRTHDAYCHICK

Measurements

  • Seaside Spray: 5 ½” x 8 ½”
  • Basic Black: 5 ¼” x 4”
  • Playing With Patterns Designer Series Paper (DSP): 1 ½” x 3 ¾”
  • Basic White: 5 ¼” x 4”, 5” x 3 ¾”, scraps for fence & chicken dies
  • Sahara Sand: scrap for feed bag die
  • Misty Moonlight/Silver Twine from Flowers For Every Season Ribbon Combo: 8”

Instructions:         

  1. Fold the Seaside Spray card base in half and use bone folder to flatten the fold.
  2. Swirl the Blending Brush on the Seaside Spray ink pad, blot on scrap paper and apply color to the center oval area of the 5” x 3 ¾” piece of Basic White cardstock using a soft swirling motion. Apply more or less ink and pressure to get a look you like.  Adhere the designer series paper strip to the bottom of this piece.  Adhere this to the Basic Black card stock and then adhere this piece to the card front.
  3. Die cut 2 pieces of the fence from scraps of Basic White card stock. Adhere to card front just above the designer series paper, trimming off excess fence.
  4. Stamp the chicken & balloon image and the party chick using black ink on scraps of Basic White card stock. Color with Stampin’ Blends markers and die cut the shapes with the Birthday Chick dies. Use the Color Lifter Blends marker to lighten the face, wings and tail.  Adhere to card front using dimensionals.  
  5. Die cut a “Happy Birthday” sentiment from scraps of Basic Black and Seaside Spray card stock. Adhere the Basic Black sentiment over the Seaside Spray sentiment so that only a slight amount of Seaside Spray is visible. Adhere this piece to the card front using small slivers of dimensionals.
  6. Die cut the feed bag from a scrap of Sahara Sand card stock, accent the details with an Ivory Blends marker and adhere to card front with a dimensional.
  7. Make a bow from the Misty Moonlight/Silver bakers twine and adhere to balloon tie with a glue dot.
  8. Stamp remaining piece of Basic White as desired and adhere to inside of card.

CARD: Simply Succulent

SIMPLYSUCCULENT

Measurements

  • Misty Moonlight CS: 5-1/2” x 8 –1/2”, scored at 4 -1/4”.  Cut at the 1-1/2” up to the 4 1/4 score line.  Rotate 180° and cut again at the 1-1/2” up to the 4-1/4” score line.  Take the middle piece & score at 2-1/8” .
  • Seaside Spray CS: 2 Strips 1-1/4” x 4”, scrap for sentiment
  • Basic White: 5 -1/4” x 4”, scrap for flower pot 1”x1-1/2” & 3”x3” for large succulent image.

Instructions:

  1. Stamp large Succulent flower with Memento Tuxedo Black onto Basic White Cardstock.
  2. Stamp flowerpot with Memento Tuxedo Black onto Basic White Cardstock.
  3. Stamp Sentiment with Misty Moonlight onto Seaside Spray Cardstock.
  4. Stamp small succulents randomly onto the 2 Seaside Spray strips with Misty Moonlight.
  5. Adhere the Seaside Spray strips to both flaps. Fill in flowers with Wink of Stella Glitter Brush.
  6. Stamp your sentiment with Misty Moonlight to top middle of the 5 -1/4” x 4” Basic White CS & adhere to the inside of card.
  7. Now glue down your flaps onto the Basic White.
  8. Let’s start blending. Starting with the main succulent – use Mint Macaron Light, color the whole flower, then come in with the Mint Macaron Dark & and mark the lines, then come back in with the light to blend. Then come  Rich Razzleberry Dark & color all the borders. Take Purple Posy light & blend. Repeat process for each succulent using colors of choice listed above.
  9. Once all colored, add your Wink of Stella Glitter Brush to entire image.
  10. Using Crumb Cake light color the whole flowerpot. Now come in with the dark & mark all the lines as well shade both sides of pot but leave about ¼ ‘ then come back in with the light.
  11. Using the large succulent die, line up over stamped succulent image, the sentiment die centered over sentiment and pot die over stamped pot run all thru the Stampin’ Cut & Emboss Machine at same time.  This saves steps.
  12. Add Stampin’ Dimensionals to the flowerpot, the sentiment & only bottom of large succulent.
  13. Adhere the sentiment to the bottom middle of the Basic White (this is your stopper).
  14. Adhere the flowerpot and large succulent to the bottom front of the Misty Moonlight CS.
  15. Using a glue dot, adhere bow to flowerpot.
  16. Add Rhinestone Basic Jewels to both sides of the sentiment.

CARD: Vine Design

VINEDESING

Measurements:

  • Flirty Flamingo card base: 5-1/2” x 8-1/2”, scored at 4-1/4” then folded on the crease with the Bone Folder, two pieces 2-3/4” x 4-1/4”, 1” x 4”
  • Old Olive: 3-1/4” x 4-1/4”
  • Basic White: 2-1/2” x 3-3/4”, 1-1/2” x 8”
  • Adhesive Sheets: , two pieces 2-3/4” x 4-1/4”

 Instructions:

  1. Adhere Adhesive Sheets to back of the two Flirty Flamingo pieces. Run through machine with dies facing up then repeat, back and forth, about three times to ensure the pieces cut out. Using Take Your Pick Die Brush Tip on a foam pad, brush back and forth to release cut out bits. Poke remaining out with paper piercing tip. Peel back Adhesive Sheet and affix to card front as close to the top and bottom edges as you can. May overlap slightly in center.
  2. Die cut Old Olive using scalloped rectangle from Stitched So Sweetly.
  3. With Old Olive ink, stamp branch once slightly off center onto Basic White. Stamp off once then stamp two more times: once to right and once to left of main branch. Adhere piece to Old Olive frame.
  4. Cut one Square Vellum Doilies in half with Paper Snips. With Stampin’ Seal carefully position, so they are balanced on both sides and adhere the halves of the doily on the back.
  5. Stamp your six preferred flowers from Vine Design onto Basic White with Flirty Flamingo ink. Die cut them out. Arrange flowers on top of branch piece then adhere five (leave one for the sentiment) with Multipurpose Liquid Glue taking care to leave a space where the sentiment will fit. Adhere this whole piece onto card front with Mini Stampin’ Dimensionals. (Tip: use the floral Flirty Flamingo layer on the card as your guide as to where to position the Old Olive branch piece.)
  6. Stamp sentiment with Basic Gray onto Flirty Flamingo taking care to align it left of center. Die cut it out. Add flower to right side with one Mini Stampin’ Dimensional. Add two more Dimensionals to back of sentiment and add to card front.
  7. Place one pearlescent white Elegant Faceted Gem onto center of each flower.