Previous month:
December 2021

January 2022

Flowing Flowers in Pale Papaya

FLOWINGFLOWERS

Measurements

  • Pale Papaya (base): 5 ½” x 8 ½”; scored at 4 ¼”
  • Basic White (layer): 5 ¼” x 4”
  • Basic White (layer): 3 ¾” x 2 ¾”
  • Basic Gray (layer): 4” x 3”
  • Ribbon: 8” & 5”

Instructions:

  1. Fold your Pale Papaya card base in half.
  2. On the smaller piece of Basic White, put one small piece of adhesive in the middle. And then attach the smaller piece to the larger piece.  This is just to hold it in place temporarily while you stamp.
  3. Stamp the flowers with Pale Papaya ink so that some of the flowers go partly on the small piece and partly on the bigger piece. Don’t worry about any “gaps” between the two pieces of cardstock as they will get covered up later.
  4. Stamp the saying, with Basic Gray ink on the bottom right of the smaller piece of cardstock.
  5. Carefully remove the smaller piece of White cardstock and attach it to the Basic Gray layer.
  6. Attach the larger piece of stamped White cardstock to the front of the card base.
  7. Wrap the shorter piece of ribbon around the middle of the smaller piece of white cardstock and secure it at the back.
  8. Attach the smaller layer to front of the card base using dimensionals.
  9. Tie a bow with the longer piece of ribbon and attach it to the card front with glue dots.
  10. Add three gray Matte Dots to the front of the card.

Supplies:


Artfully Layered for a Challenge!

Good morning!  I had such a great morning!  Finished plans for a swap and a class!  So, took a few moments to stamp for fun!  Wasn't sure what I wanted to create, so headed to my pinterest board where I collect sketches and color combinations!  I found the sketch at Try Stampin' On Tuesday, and here's what I came up with:

TSOT539Tammy

This suite is sooooo easy to work with!  The colors are amazing, and everything coordinates perfectly!!  More samples to come, I promise!!

Here's the sketch--I followed it pretty closely!  (I'm a rule follower by nature! haha!)
TSOT539Tammy

And, here are all the wonderful products used on today's card -- I've listed the suite and bundle--please don't order both! 


Let's Set Sail!

Here's a great masculine bundle for you:  Let's Set Sail!!  I love that it's a punch, rather than dies.  Don't get me wrong--I love dies!  But, it's nice to have variety!

Jan sas 4

Measurements:

  • Basic White Thick:  5 1/2" x 8 1/2", score at 4 1/4"
  • Basic White:  5" x 3 3/4"
  • Simply Marbelous DSP:  3" x 3"
  • Basic Black:  2 3/4" x 5 1/2" (for punching)

Instructions:

  1. Cut circle with Layering Circles Dies and Cut & Emboss Machine in the 1/4 sheet of Basic White.
  2. Stamp sentiment in lower left corner of 1/4 sheet of Basic White.
  3. Add adhesive on back of the 1/4 sheet of Basic White--around the circle.   Attach the square of designer paper.
  4. Flip over, and stamp bird in the upper right of the circle.
  5. Attach this to the card base using dimensionals.
  6. Punch sailboat from Basic Black cardstock.
  7. Adhere to front of card--see photo for placement.
  8. Add 3 of the Black Matte Dots.

Supplies: 


Daffodil Afternoon Designer Series Paper

WOW!  This paper is stunning!!  and, it's FREE with a $50 purchase!!  Coordinates perfectly with the Daffodil Daydream Bundle--a must have for the spring!

DAFFODILDAYDREAMA

Measurements

  • Mossy Meadow CS: 5 ½ x 8 ½”; scrap
  • Very Vanilla CS: 4 x 5 ¼” (inside); scrap for a label and die cutting
  • Pear Pizzazz CS: 1 ¼” x 10";
  • DSP: (2) 1 7/8 x 5 ¼”; 1 x 10

Instructions:

  1. Score mossy meadow CS on 8 ½” side at 2 1/8” on both sides. Adhere DSP to the front 2 flaps.
  2. Adhere DSP strip to the pear pizzaz CS. Create a belly band by wrapping a pear pizzaz piece around the card and securing with tear tape in the front.
  3. Die cut stitched so sweetly label from very vanilla piece. Stamp a sentiment in Mossy meadow ink. Adhere to the belly band with dimensionals.
  4. Stamp a daffodil image in memento black ink on very vanilla piece. Color with blends. Die cut. Die cut 2 leaves from mossy meadow piece. Adhere behind the daffodils. Add to the belly band with dimensionals.
  5. Stamp a part of the daffodil image on 4 x 5 ¼” piece of very vanilla for inside the card. Color with blends. Adhere inside the card.
  6. Tie a bow and add to the daffodils with a glue dot.
  7. Add 3 butterflies – 2 to the label and 1 to the card.
  8. Add crystal effects to the center of the flowers.

DAFFODILDAYDREAM

Supplies:


Awesome Otters

This set is my absolute favorite Sale-a-bration set!!  They are so cute, and so easy to work with!!  Here's an adorable birthday card!

OTTERS

Measurements

  • Misty Moonlight: 4-1/4” x 11”, scored at 5-1/2”
  • Basic White: 4” x 5-1/4” and 2-1/2” x 3-1/2”
  • Just Jade: 2-3/4” x 3-3/4”
  • Abstract Beauty Paper: 3-1/2” x 5-1/4” (polka dot pattern) and 4” x 4-1/4” (abstract pattern)

Instructions:

  1. Fold Misty Moonlight cardstock in half. Adhere the 4” x 5-1/4” piece of Basic White cardstock inside the card.   Adhere the 4” x 4-1/4” piece of Abstract Beauty paper to front of card.
  2. Using the 3-1/2” x 5-1/4” piece of Abstract Beauty Paper, wrap a 10” piece of Misty Moonlight & Petal Pink ribbon around the paper and tie into a knot. Adhere to the base card.
  3. Using the 2-1/2” x 3-1/2” piece of Basic White cardstock, stamp the sentiment towards top of cardstock using Basic Gray ink. Stamp the otter below that & stamp the hat using the same ink.
  4. Color in the hat using the Light Misty Moonlight and Just Jade Stampin’ Blends. Color the Otter using the Light Smoky Slate Blend and highlight his nose using the Dark Smoky Slate Blend.
  5. Adhere the Basic White cardstock to the Just Jade cardstock and adhere to card base to finish.

Supplies:


Queen Anne's Lace

I know we're all excited about the new 2022 Jan-June Mini Catalog--believe me, I am, too!!  But, we have to show the Annual Catalog some love, too!  haha!!  Here's one using the Queen Anne's Lace Stamp Set:

Nov sas 3

 

For the 3 panels in front--I stamp a single panel, then cut into thirds.  It's much easier than trying to hold the 3 pieces together while you stamp!!  For the outline stamp, we used Highland Heather ink, and the detail stamps are Fresh Freesia!

Here are all the products used:

 


A Friendly Hello

Happy Sunday Morning!  

Today's card features the Friendly Hello Stamp Set and Designer Series Paper!  This is a FREE item you can earn with a $100 purchase during Sale-a-bration!

Cc jan 3

I love this Fresh Freesia!!  And, it pairs so nicely with Basic Black!!  For the sentiment panel, I simply stamped the flower image several times in Fresh Freesia ink, then stamped the sentiment in Tuxedo Black ink.  That is popped up with dimensionals over the designer series paper.  Simple!

Here are all the wonderful supplies used on this card!  Click on any of them to be taken to my store!  Thank you in advance for your support of my small business!!


Sweet Conversations for the Color Hues Challenge!

Good morning!!  It's another fun fold!!  And, this one is easy peasy, too!!

The Sweet Conversations Suite is so much fun to use!  And, the colors were perfect for the Color Hues Challenge of Red & Purple!!

Cc jan 5
Cc jan 5

This is Real Red and Highland Heather--so pretty together!!  And the card is actually 2 pieces that are folded then adhered together:

Base piece is 5 1/2" x 8 1/2", scored at 1 1/4", 2" & 5 1/2"

"Tent" piece is 3 1/4" x 8 1/2", scored at 4 1/4"

Then just glue them together!  Easy!

Supplies used today:


Daffodil Daydreams

I absolutely adore fun fold cards--especially ones that are super easy to make!!  Here's a fun one with the Daffodil Daydreams Stamp Set:

Cc jan 4
Cc jan 4
Cc jan 4

The Daffodil Afternoon Designer Paper coordinates perfectly, and you can earn it FREE with a $50 purchase!

Click on any of the images below to be taken to my online store--I certainly appreciate your support of my little business!