Masculine Feed

CARD: Game On

GAMEON

Measurements

  • Very Vanilla Thick CS: 5-1/2” x 8-1/2”, scored in half at 4-1/4”
  • Basic Gray CS: 5-1/4” x 4”
  • Very Vanilla CS: 5-1/4” x ¾”;     scrap 2-1/2” x 2” for the chessmen
  • Well Suited DSP: 2-1/2” x 2”

Instructions:

  1. Burnish the fold in the card base using a Bone Folder.
  2. Put the Basic Gray CS layer in the embossing folder and run it through the Stampin’ Cut & Emboss Machine to emboss.
  3. Stamp the sentiment in black ink onto the Very Vanilla CS strip.
  4. Stamp the chessboard design in black ink onto the inside of the card base, one in the upper left corner and one in the lower right corner. (Oops, I forgot to photograph the inside.)
  5. Stamp the chessmen in black ink onto the scrap of Very Vanilla CS, then fussy cut using Paper Snips.
  6. Glue the Basic Gray CS layer onto the front of the card base.
  7. Glue the sentiment strip onto the Basic Gray CS layer.
  8. Glue the chessmen onto the DSP layer.
  9. Glue the DSP layer over the sentiment strip.
  10. Apply 3 silver pearls onto the card front using a Take Your Pick tool.

Supplies:

 


CARD: Snailed It

SNAILEDIT2

Measurements

  • Bermuda Bay: 5 ½” x 8 ½”, scored at 4 ¼”
  • Real Red: enough to cut out stitched frame
  • DSP:2 x 5 1/4, 3/4 x 5 1/4, and 1 1/4 x 5 1/4
  • Whisper White: Enough to cut out stitched frame

Instructions:

  1. Adhere DSP to the card base
  2. Stamp image on Basic White and color with Blends, cut out with stitched frame die and then trim off the border, cut out stitched frame in real red and adhere them together. attach with dimensionals to card base.
  3. Add resin hearts.

CARD: Hand-Penned Petals

HANDPENNEDPETALS

Measurements

  • Pale Papaya: 4-1/4” x 11” scored at 5-1/2” on the long edge
  • Basic White: Largest Labels – Hippo & Friends; scrap for stamping flowers
  • Mint Macaron Striped DSP: 1-1/2” x 5-1/4”
  • Floral DSP: 4” x 5-1/4”
  • Pale Papaya Polka Dot DSP: ¼” x 2”

Instructions:

  1. Adhere the floral DSP to the card front.
  2. Use the scalloped edge/stitched die from the Penned Flowers die set and cut along the right edge as shown above. Adhere to the left side of the DSP from Step #1.
  3. Adhere the Basic White label in the center of card front with Stampin’ Dimensionals.
  4. Stamp the floral image in Momento Tuxedo Black ink onto a scrap of Basic White. Stamp the flowers and leaves using the Pale Papaya, Soft Succulent and Polished Pink ink as shown. Cut out using the coordinating die.
  5. Adhere the floral cut out onto the label using Stampin’ Dimensionals.
  6. Stamp the sentiment in black on the strip of DSP. Trim ends as shown and adhere using Mini Stampin’ Dimensionals. Add jewels as desired.

CARD: Hats Off Slimline Card

HATSOFF

Measurements

  • Basic White Thick: 9” x 8” scored at 4” for card base
  • Basic White: 3-1/2” x 8-1/2”
  • Pacific Point, Balmy Blue, Misty Moonlight and Pool Party: 4” x 3” (plus one extra Pool Party)
  • Night of Navy: 5/8” x 4”
  • Pacific Point: 1/2” x 4”

Instructions:

  1. Stamp a hat image on each of the larger blue rectangles and a patch on each hat with Night of Navy ink. Cut each one out with the coordinating dies on the Stampin’ Cut & Emboss machine, along with a star.
  2. Adhere the hats to the front of the 3-1/2” x 8-1/2” white card stock with SMALL amount of Stampin’ Seal, letting some of the hats hang over the edge. Use paper trimmer or scissors to cut off any pieces hanging over the edge of the white card stock.
  3. Remove each piece and add dimensional to raise the image, then place it back where it was. Add stars on dimensionals between hats.
  4. Adhere to the panel to the front of thick white card base
  5. Heat emboss sentiments on the small blue strips, cut down to desired size and attach to front of card.

CARD: Soar Confidently

Good morning!  I had some time to play yesterday, and designed this wonderful Father's Day card for two challenges!!  First, the sketch is from Tuesday Morning Sketches, and secondly, a theme challenge from Inkspire Me!

Tms#603

I combined some new supplies with the old!  Okay, actually, the only "new" item is the Smoky Slate Textured Ribbon -- it's it pretty?!!  And, working in the aviation world, I just love this biplane from the Soar Confidently Stamp Set!

Here are the two challenges:

and, here are all the supplies I used on this card:


CARD: Soar Confidently

Yes, another card with this awesome set!  I am so sad that it will only be available through the end of June--it's didn't make the cut for the new Annual Catalog!  So, don't be surprised if you see it alot from not until June 30th!  It's such a great set, especially for the men in your lives!!

DSCF5797

It doesn't open the "normal" way -- it's like a notecard on the front of a card!!
DSCF5797


CARD: Soar Confidently (Fun Fold!!)

Today's card features a great masculine set found in the 2021 Jan-June Catalog:  Soar Confidently.  This is a wonderful set for all the men in your life--great sentiments, too!!

And, check out the fun fold!!

Febsas3
Febsas3

You could also add a pocket on the middle panel and put a gift card in there! 

As usual, here are the supplies used -- simply click on them to be taken to my online store!

 


CARD: Darling Donkeys

I know I said the Flower & Field DSP was my favorite Sale-a-bration item, but Darling Donkeys is a very close second!  He's just so darn cute!!!  Here's a super quick card--you could make a pile of these in just a few minutes!

Febsas6

I used the In Good Taste Designer Paper for the fence posts -- there are several designs in the pack that could be used!  The Donkey was colored in with Stampin' Write Markers (Soft Suede, Crumb Cake, Petal Pink).

Supplies used:


CARD: Happy Thoughts

So, the challenge over at the Less is More blog is "chocolate"!  Interesting, right?  Of course, with it being close to Valentine's Day, my first thought was chocolate candy.  BUT, as I played around a bit, my card took a different direction!  I went masculine with all things Early Espresso--ribbon, cardstock, ink!  Enjoy!

Lessismore436 (1)

Here are all the products used:

 


CARD: Corner Bouquet

WOW!  I wasn't really interested in the Corner Bouquet (Sale-a-bration), but then I saw this beautiful card!!  Now I "need" it!! haha!!

Cornerbouquet

Measurements:

  • Crumb Cake: 8½ x 5½ score at 4¼ card base
  • Early Espresso 3-5/8 x 5
  • Soft Suede 5 x 3½
  • Very Vanilla 4½ x 3¼, 5¼ x 4 inside

Instruction:

  1. Using the Blending Brushes blend at the top Crumb Cake and at the bottom Soft Suede onto the 4½ x 3¼ Very Vanilla cardstock.
  2. Die cut the stitched rectangle die 3 x 4-3/8
  3. Stamp the big corner bouquet and greeting using Early espresso ink.
  4. Die cut the Soft Suede cardstock using the 4¾ x 3-3/8 stitched rectangle
  5. Place a piece of Tear &Tape on the left-hand side on the edge of the card front.
  6. Slide an antique side into a piece of 6” Early Espresso Faux Suede trim and place on top of the teat and tape. Trim the trim with scissors.
  7. Adhere all layers to the card front.
  8. Using glue dots adhere the antique corner onto the top layer.
  9. Stamp the small corner bouquet onto the 5¼ x 4 Very Vanilla and adhere inside.

Supplies:


CARD: Happiest of Birthdays

Here's an awesome, easy to make, masculine birthday card!  

HAPPIESTOFBIRTHDAYS

Here is the "open" view--so you can see that the front is shorter!  Very cool!

HAPPIESTOFBIRTHDAYSa

Measurements

  • Cinnamon Cider: 5-1/2” x 7” card base, score at 4-1/4”
  • Black: 3-3/4” x 3”
  • DSP: 5-1/4” x 2-1/2” for gray; 5-1/4” x 1-1/2” for cider
  • Crumb Cake: 4-1/2” x 1-1/2”
  • Copper Foil: 3-3/4” x 2-3/4” for die-cut
  • Whisper White: 3-3/4” x 2-3/4” for die-cut; 3-1/2” x 2-3/4” for inside

Instructions:

  1. Adhere gray World of Good DSP to the Cinnamon Cider front flap.
  2. Adhere cider World of Good DSP to the inside bottom of the card, so it shows through to front.
  3. Adhere Basic Black layer to the shortened card front.
  4. Banner-cut the ends of the Crumb Cake layer, then adhere to the card front.
  5. Use Cinnamon Cider and Basic Black Stampin’ Write Markers to color directly onto the red rubber Happiest of Birthdays stamp. Gently use the brush-tip end of the marker to color. “Huff” onto the stamp to refresh the ink, then stamp onto Whisper White cardstock.
  6. Die-cut the sentiment with the Tasteful Labels die.
  7. Die-cut a second Tasteful Labels shape in Copper Foil, cut in half length-wise, then adhere to the top and bottom of the sentiment label to create a frame. Trim away any excess sticking out on the sides.
  8. Pop up sentiment onto the card front with Dimensionals.
  9. Add Champagne Rhinestone Jewels to the corners of the Basic Black layer.
  10. Stamp another Happiest of Birthdays sentiment on the Whisper White layer with Memento Black ink. Adhere it to the inside of the card.